Donut 17 Special Edition Orange (17kg/40lbs) for 2 x 7L or 2 x 10L

Description

Narrow Top Section – One of the key factors of a comfortable trim is high head position. Many users of standard wings or donuts often complain about the excess amount of fabric in the upper part of conventional wings/donuts which blocks the head and obstructs the way to configure regulators and hoses.

Sides and Lower Parts – Wide section on the sides and bottom allow for higher, thus safer position of a diver on the surface. This particular shape of the wing allows to fully use the capacity of the bladder without having the donut protruding from the twin-tank. The particular sewing also assures that the active parts of the bladder are never limited by any other pieces of the equipment (tanks, backplate, or batteries).

Easy Gas Dumping System – The inflator outlet is located in the highest point of the Donut. It means that the gas is not getting blocked in any part of the bladder. Therefore, the deflation is done much more easily. It is sufficient to slightly lift the corrugated inflator hose to efficiently dump the gas. The dump valve on the rear is also ergonomically and intuitively located. It allows you to easily find and use it without changing your horizontal position underwater.

Which Donut SE is for Me?

Donut Special Edition exist in three sizes:

DONUT 17 SE : 17 litres bladder recommended for small twinsets such as 2×7L.
DONUT 22 SE : 22 litres bladder recommended for most common technical configurations with 2×12L twinsets and extra stage-tanks.
DONUT 30 SE : 30 litres bladder suitable for the biggest double sets available on the market. It was tested in several multi-stage dives (i.e.2×18L + 6 stage-tanks).